How to adjust the gap of the gear shift cable?
Release time:
2024-07-03
The gap for the entire gear shift cable needs to be completed by two people together. The specific steps are as follows:
Step 1, one person sits in the driver's seat and pushes the joystick to the 1st gear position, making sure not to let go.
Step 2, the other person adjusts the two configurations on the gearbox by pushing and pulling separately to see if there is any gap or if it is pushed too far.
Step 3, test each gear one by one and adjust all the cables to the appropriate length.
Most manual transmissions are in 5th gear. Below is an introduction using 5th gear manual as an example:
To switch to 1st and 2nd gear, you need to turn the joystick to the left; when shifting to 5th gear and R gear, you need to turn the joystick to the right. The left and right elbow rods are the gear shift cable.
To switch to 1st, 3rd, and 5th gears, you must shift the stop rod upwards; to switch to 2nd, 4th, and R gears, you need to downshift the joystick. The up and down shift rod is a gear shift cable.
When adjusting, you need to pry open the cover of the base, pull hard, and the gear lever will come down. Then you can make the adjustments.
Introduction to manual transmission:
Manual transmission is a manual transmission (MT), also known as manual gear, which changes the gear engagement device in the transmission through a manual gear lever to change the transmission ratio, thereby achieving the purpose of speed change.
Working principle: Change the transmission ratio (gear ratio) of the engaged gears through the shift fork, thereby changing the driving torque to adapt to different working conditions.
What issues should be considered when selecting materials for hardware stamping parts?
In the variety of steel plate specifications, whether it is a fixed-size plate or a coil plate, the sales price varies with different coil widths for materials of the same type and thickness. Therefore, to reduce costs, efforts should be made in determining the coil width during procurement, aiming to select a coil width range that does not incur additional charges while ensuring material utilization. For fixed-size plates, it is advisable to choose suitable specifications so that after cutting by the steel mill, no secondary cutting is required, thus reducing cutting costs; for coil plates, it is best to select specifications and processes for uncoiling that minimize the workload of secondary cutting and improve work efficiency.
2024-07-02
How to properly adjust the throttle cable of a car?
Adjusting the car's throttle cable requires certain professional knowledge and tools, so it is recommended to seek a professional technician for the operation.
2024-07-02
What are the symptoms of a throttle cable failure?
Throttle cable failure refers to various issues that occur during the use of the throttle cable, with common failure modes including jamming, breaking, wear, and damage. Among these, jamming and breaking account for a significant proportion.
2024-07-03